Brother International DCP120C Quick Setup Guide - English - Page 17

Macintosh® USB Installing the Driver & Software Macintosh® For USB Interface Users For Mac OS® X 10.2.4 or greater Important Make sure that you have finished the instructions from Step 1 Setting Up the Machine on page 4-9. Note For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to Mac OS® X 10.2.4 or greater. (For the latest information for Mac OS® X, visit http://solutions.brother.com) 1 Unplug the machine from the AC outlet and from your computer, if you already connected an interface cable. 2 Turn on your Macintosh®. 3 Put the supplied CD-ROM into your CD-ROM drive. 4 Double-click the Start Here OSX icon to install the drivers and MFL-Pro Suite. If the language screen appears, choose your language. 5 Click MFL-Pro Suite to install. 6 Follow the on-screen instructions, and restart your Macintosh®. 7 Open the scanner cover to its open position. 8 After the DeviceSelector window appears connect the USB interface cable to your Macintosh and then to the machine. The DeviceSelector window will not appear if you have connected a USB interface cable to the machine before restarting your Macintosh® or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem continue with the installation but skip step 13. After the software installation is completed you should select your Brother machine from the Model pull-down list in the main screen of ControlCenter2. For details, See the Software User's Guide on the CD-ROM. 15