Brother International Entrepreneur Pro PR1000e Users Manual - English - Page 255
Removing the table
View all Brother International Entrepreneur Pro PR1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Removing the table Loosen the two thumb screws, lift up the 1 table, and then pull it off toward you. After the pins on each side reach the notches 2 in the guide plates, raise the table to lift the pins up through the notches. 1 Thumb screw 1 Pin 2 Notch X Remove the table from the machine. Carefully pull out the table so that it does 3 not hit the machine. 7 Tighten the thumb screws on the table. 4 Installing the Included Table 253
Installing the Included Table
253
7
—————————————————————————————————————————————————————————————————————————————————————
Removing the table
1
Loosen the two thumb screws, lift up the
table, and then pull it off toward you.
1
Thumb screw
2
After the pins on each side reach the notches
in the guide plates, raise the table to lift the
pins up through the notches.
1
Pin
2
Notch
X
Remove the table from the machine.
3
Carefully pull out the table so that it does
not hit the machine.
4
Tighten the thumb screws on the table.