Brother International HL 1030 Service Manual - Page 41
NETWORK BOARD OPERATION (FOR HL-1270N ONLY), Preparing the BR-net Board - software
UPC - 012502020134
View all Brother International HL 1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CHAPTER 2 INSTALLATION AND BASIC OPERATION 6. NETWORK BOARD OPERATION (FOR HL-1270N ONLY) The network board installed in the back of the printer allows you to share the printer on a network. 6.1 Preparing the BR-net Board 6.1.1 Connect the Ethernet cable (1) Turn off the printer power. (2) Connect one end of the Ethernet Hub cable to the 10/100Base TX port of the HL-1270N. (3) Connect the other end of your Ethernet cable to a free port on your Ethernet hub. (3) Turn on the printer power. Fig. 2-29 6.1.2 Install the BRAdmin32: configuration utility (for Windows 95/98/NT 4.0 users only) NOTE: If you use another operating system, refer to the Network User's Guide on the supplied CDROM. (1) Insert the supplied CD-ROM into your CD-ROM drive. (2) Select the HL-1270N model button and follow the screen instructions. (3) The BRAdmin32 utility will then be installed onto your computer. When the software is installed, re-boot your computer. (4) The Troubleshooting information table on the right contains further configuration details. 2-17 Fig. 2-30 Fig. 2-31