Brother International HL 1030 Service Manual - Page 79
Then remove the one friction spring., Remove the paper indicator.
UPC - 012502020134
View all Brother International HL 1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (17) Turn the cassette upside down and remove the one M3x8 Taptite screw to remove the side guide gear. Then remove the one friction spring. (18) Remove the two side guide racks. (19) Remove the paper indicator. Taptite cup M3x8 Side guide gear Friction spring ➀ Side guide rack ➁ ➀ Side guide rack Step (19) ➀ ➁ Paper indicator Fig. 4-13 NOTE: • When re-assembling the side guide racks, they should both be aligned so that the wide end of the racks are in line with the inside edge of the paper guide release slots in the cassette before refitting the spring and gear. • When replacing/re-assembling the paper cassette, remove the old grease and apply a suitable amount of grease onto both sides of the paper cassette referring to the figure below; Grease: Molykote PG-662 (1 sesame size) Grease: Molykote PG-662 (1 sesame size) Paper cassette Fig. 4-14 4-9