Brother International HL-1660E Service Manual - Page 52
Side Cover R
View all Brother International HL-1660E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1.5.2 Changeover guide, jam remove cover (1) Open the jam remove cover by hooking your finger on 2 dents ( A ). (2) Remove the jam remove cover with its center part opened by bending the arm of the boss both on sides ( B ) toward the front ( C ). (3) Remove the changeover guide from the boss by bending the right hook (viewed from the rear) of the rear cover ( D ), then remove the changeover guide ( E ). Hole Boss Rear cover assy Changeover guide A D E B Jam remove cover C Dents Figure 4.7 1.6 Side Cover R (1) Remove the side cover R by releasing the 4 hooks. Rear Side cover R Front Hook at 4 places Figure 4.8 Note: Before releasing the 4 hooks, remove the paper tray. IV - 5
IV
- 5
1.5.2
Changeover guide, jam remove cover
(1)
Open the jam remove cover by hooking your finger on 2 dents ( A ).
(2)
Remove the jam remove cover with its center part opened by bending the arm of the
boss both on sides ( B ) toward the front ( C ).
(3)
Remove the changeover guide from the boss by bending the right hook (viewed from the
rear) of the rear cover ( D ), then remove the changeover guide ( E ).
1.6
Side Cover R
(1)
Remove the side cover R by releasing the 4 hooks.
Figure 4.7
Hole
Rear cover assy
Changeover guide
Jam remove cover
Dents
Boss
D
E
B
C
A
Figure 4.8
Front
Side cover R
Hook at 4 places
Note:
Before releasing the 4 hooks, remove
the paper tray.
Rear