Brother International HL-1660E Service Manual - Page 68

(7) Release the left hook and take off the paper delivery actuator. Paper delivery actuator Fixing unit cover Figure 4.52 (8) 1) Remove the fixing heat insulation cover ( by loosening the 2 screws), the pressure roller spring and pressure roller bearing on both sides, and the pressure roller. Pressure roller bearing Screws Pressure roller spring Pressure roller Heat insulation cover Fixing unit chassis Figure 4.53 Figure 4.54 2) Remove the retaining rings (on both sides). 3) Remove the HR gear, loosen the screw and remove the spring washer, remove the left and right HR bearings and the heat roller by sliding it. Screw Spring washer Retaining ring Heat roller HR bearing HR gear Retaining ring HR bearing Figure 4.55 IV - 21