Brother International HL-1660E Service Manual - Page 70
DC Gear Holder Assy, 32 PS Switch Wire, Remote Switch
View all Brother International HL-1660E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
1.31 DC Gear Holder Assy (1) Remove the DC motor connector, then remove the paper delivery holder spring. (2) Loosen the 4 screws and remove the DC gear unit from the body. (3) Remove the paper delivery gear assy, the gears, the gear 48 spring, and the washer. (4) Loosen the 3 screws and remove the DC motor assy from the gear holder. DC gear unit Remote switch Paper delivery holder spring Gear 21 Paper delivery gear assy Gear 48 Gear 48 spring 4 screws Gear 28 Washer Gear 20/50 Gear 22/55 PS switch wire DC motor assy Gear 24/72 Gear 39 3 screws DC gear holder assy Figure 4.58 Connector Figure 4.59 1.32 PS Switch Wire, Remote Switch (1) Pull out the PS switch wire from the remote switch and the switch attachment. Lift slightly the wires when pulling them out. This is in order to release the chassis caught at 2 places. (2) Remove the remote switch from the chassis. Switch attachment Remote switch Remote switch PS switch wire Figure 4.60 Figure 4.61 Chassis IV - 23