Brother International HL 2700CN Network Users Manual - English - Page 95
Windows NT®4.0 Printer Setup, Log into Windows NT
UPC - 840356824994
View all Brother International HL 2700CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
9 The selected print server address will then appear in the smaller box under Card Address. 10 Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Next. 11 Select the correct driver click Next. 12 Give a name to the printer and specify if you wish to be able to print from DOS application. Then click Next. 13 Specify the share name (if you are going to share the printer). 14 Enter the Location and Comment information and click Next until you see the Completing the Add Printer Wizard screen. 15 Click Finish. Windows NT®4.0 Printer Setup Log into Windows NT®4.0 with administrative privileges. From the Start menu, select Settings and then Printers. 1 Select Add Printer (If you have already installed a Brother printer driver, double click the printer driver that you wish to configure and then select Printers/Properties, select the Ports tab and continue from Step 4 (ignoring steps 9-11 about installing the correct driver)). 2 Select My Computer and then click Next. 3 Select Add a Port. 4 Select Hewlett-Packard Network Port and then click New Port. 5 A list of available print server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the address of the desired print server (you can see the Ethernet address on the printer settings page). DLC PRINTING 8 - 3