Brother International HL-3075CW Users Manual - English - Page 94

Reset Menu, Color Correction, Network for HL-3075CW users continued, Display Shows, Description

Get Brother International HL-3075CW PDF manuals and user guides View all Brother International HL-3075CW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Control Panel Network for HL-3075CW users (continued) Submenu 1 Submenu 2 Menu Selections Options Descriptions WLAN Status (Appears only when WLAN Enable is On.) Status Signal Channel Speed SSID 3 Shows SSID [uses a maximum of 32 digits and characters 0-9, a-z and A-Z in ASCII values] Comm. Mode Ad-hoc*/Infrastructure Shows the current Communication Mode. Set to Default Restores wired network settings of the internal print server to the factory default. WLAN Enable Off*/On Chooses Ethernet link mode. Factory Reset Restores all network settings of the internal print server to the factory default. The factory settings are shown in Bold with an asterisk. 1 On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the machine's control panel. Reset Menu Display Shows Reset Printer Factory Reset Description Resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons. Resets the printer and restores the printer settings (including command settings) to the factory default settings. The factory settings are shown in Bold with an asterisk. Color Correction Submenu Frequency Menu Selections Normal*/Low/Off Color Calibration Calibrate Reset Options Descriptions Sets the interval time you want to carry out the auto color correction Carry out calibration to revise the colors. (See Calibration on page 95.) Set the calibration parameters back to the default settings. (See Calibration on page 95.) The factory settings are shown in Bold with an asterisk. 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
Control Panel
89
3
1
On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
WLAN
Status
(Appears only
when
WLAN
Enable
is
On
.)
Status
Signal
Channel
Speed
SSID
Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Comm. Mode
Ad-hoc
*
/
Infrastructure
Shows the current
Communication Mode.
Set to
Default
Restores wired network settings
of the internal print server to the
factory default.
WLAN
Enable
Off
*
/
On
Chooses Ethernet link mode.
Factory
Reset
Restores all network settings of the internal print server to the factory default.
Reset Menu
Display Shows
Description
Reset Printer
Resets the printer and restores all printer settings (including command settings) to settings
you have previously made with the control panel buttons.
Factory Reset
Resets the printer and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Color Correction
Submenu
Menu Selections
Options
Descriptions
Frequency
Normal
*
/
Low
/
Off
Sets the interval time you want to
carry out the auto color correction
Color Calibration Calibrate
Carry out calibration to revise the
colors. (See
Calibration
on page 95.)
Reset
Set the calibration parameters back
to the default settings. (See
Calibration
on page 95.)
The factory settings are shown in Bold with an asterisk.
Network for HL-3075CW users (continued)
Submenu 1
Submenu 2
Menu Selections
Options
Descriptions
The factory settings are shown in Bold with an asterisk.