Brother International HL-L5000D Online Users Guide HTML - Page 105
Cancel, If you are using a Windows Vista, Windows, computer as a Registrar, complete
![]() |
View all Brother International HL-L5000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
2 Routers or access points that support WPS are marked with this symbol: >> HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT >> HL-L6300DW HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the [WLAN] option, and then press OK. 3. Press a or b to select the [WPS w/PIN Code] option, and then press OK. 4. When [WLAN Enable?] appears, press a to select On. This will start the wireless setup wizard. To cancel, press Cancel. 5. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router. 6. Using a computer that is on the network, type "http://access point's IP address" in your browser (where "access point's IP address" is the IP address of the device that is being used as the Registrar). 7. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows Vista®, Windows® 7, or Windows® 8 computer as a Registrar, complete the following steps: 8. Do one of the following: • (Windows Vista®) 100
![](/manual_guide/products/brother-international-hll5000d-online-users-guide-html-8b0d713/105.png)