Brother International HL-L5000D Online Users Guide HTML - Page 221
Authentication Key ESP, AH
View all Brother International HL-L5000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
that is necessary for IPsec is determined and the encryption keys are shared. For IKE, the encryption keys are exchanged using the Diffie-Hellman key exchange method, and encrypted communication that is limited to IKE is carried out. Select Manual. Authentication Key (ESP,AH) Specify the key to use for authentication. Type the In/Out values. These settings are necessary when Custom is selected for Use Prefixed Template, Manual is selected for IKE, and a setting other than None is selected for Hash for Encapsulating Security section. The number of characters you can set differs depending on the setting you chose for Hash in the Encapsulating Security section. If the length of the specified authentication key is different than the selected hash algorithm, an error will occur. • MD5: 128 bits (16 bytes) • SHA1: 160 bits (20 bytes) • SHA256: 256 bits (32 bytes) • SHA384: 384 bits (48 bytes) • SHA512: 512 bits (64 bytes) When you specify the key in ASCII Code, enclose the characters in double quotation marks ("). Code key (ESP) Specify the key to use for encryption. Type the In/Out values. These settings are necessary when Custom is selected in Use Prefixed Template, Manual is selected in IKE, and ESP is selected in Protocol in Encapsulating Security. The number of characters you can set differs depending on the setting you chose for Encryption in the Encapsulating Security section. If the length of the specified code key is different than the selected encryption algorithm, an error will occur. • DES: 64 bits (8 bytes) • 3DES: 192 bits (24 bytes) • AES-CBC 128: 128 bits (16 bytes) • AES-CBC 256: 256 bits (32 bytes) When you specify the key in ASCII Code, enclose the characters in double quotation marks ("). SPI These parameters are used to identify security information. Generally, a host has multiple Security Associations (SAs) for several types of IPsec communication. Therefore, it is necessary to identify the applicable SA when an IPsec packet is received. The SPI parameter, which identifies the SA, is included in the Authentication Header (AH) and Encapsulating Security Payload (ESP) header. These settings are necessary when Custom is selected for Use Prefixed Template, and Manual is selected for IKE. Enter the In/Out values. (3-10 characters) Encapsulating Security • Protocol Select ESP or AH. 216