Brother International HL-L5000D Online Users Guide HTML - Page 278
I Cannot Complete the Wireless Network Setup Configuration
View all Brother International HL-L5000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup Configuration I Cannot Complete the Wireless Network Setup Configuration Related Models: HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT/HL-L6300DW Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to resolve the problem, follow the instructions below: Investigate the problem using the WLAN Report. Cause Action Interface Your security settings (SSID/ • Network Key) are not correct. • • Confirm the security settings using the Wireless Setup Helper Wireless utility. For more information and to download the utility, go to your model's Downloads page on the Brother Solutions Center at support.brother.com. Select and confirm that you are using the correct security settings. - See the instructions supplied with your wireless LAN access point/router for information on how to find the security settings. - The manufacturer's name or model number of the wireless LAN access point/router may be used as the default security settings. - Consult with the access point/router manufacturer, your Internet provider, or network administrator. For definitions of SSID and Network Key, see the entries SSID, Network Key and Channels in the Glossary. Your Brother machine's MAC Confirm that the Brother machine's MAC Address is allowed in the address is not allowed. filter. You can find the MAC Address on your Brother machine's control panel. Wireless Your wireless LAN access point/router is in stealth mode (not broadcasting the SSID). • Enter the correct SSID name or Network Key manually. • Check the SSID name or the Network Key in the instructions supplied with your wireless LAN access point/router and reconfigure the wireless network setup. Wireless Your security settings (SSID/ • password) are not correct. • Confirm the SSID and password. - When you are configuring the network manually, the SSID and password are displayed on your Brother machine. If your mobile device supports the manual configuration, the SSID and password will be displayed on your mobile device's screen. For the definition of SSID, see the Glossary. Wi-Fi Direct You are using Android™ 4.0. If your mobile device disconnects (approximately six minutes after using Wi-Fi Direct), try the one-push configuration using WPS (recommended) and set the Brother machine as a G/O. Wi-Fi Direct Your Brother machine is placed too far from your mobile device. Move your Brother machine within about 3.3 feet (1 meter) of the Wi-Fi Direct mobile device when you configure the Wi-Fi Direct network settings. There are some obstructions Move your Brother machine to an obstruction-free area. (walls or furniture, for example) between your machine and the mobile device. Wi-Fi Direct There is a wireless computer, Bluetoothsupported device, microwave oven, or digital Move other devices away from the Brother machine or the mobile device. Wi-Fi Direct 273