Brother International HL-L5000D Online Users Guide HTML - Page 123
Communication, Authentication, Method, Encryption Mode, User ID, Password, Authentication Method
View all Brother International HL-L5000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Communication Mode Infrastructure Authentication Method EAP-FAST/MSCHOPv2 Encryption Mode User ID AES Brother Password 12345678 • If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use. • If you verify your machine using the common name of the server certificate, we recommend writing down the common name before you start configuration. Contact your network administrator about the common name of the server certificate. 2. Press [Settings] > [Network] > [WLAN] > [Setup Wizard]. 3. When [Switch network interface to wireless?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 4. The machine will search for your network and display a list of available SSIDs. Press a or b to display the [] option. 5. Press []. 6. Enter the SSID name, and then press [OK]. For more information about how to enter text, see the User's Guide. 7. Press [Infrastructure]. 8. Press a or b to display the Authentication Method you want. 9. Press the Authentication Method you want. 10. Do one of the following: • If you selected the [LEAP] option, enter the user ID, and then press [OK]. Enter the Password, and then press [OK]. • If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press a or b to select the Inner Authentication Method [NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP]. Depending on your Authentication Method, the Inner Authentication Method selections differ. Press a or b to select the Encryption Type [TKIP+AES] or [AES]. Press a or b to select the Verification Method [No Verification], [CA] or [CA + Server ID]. - If you selected the [CA + Server ID] option, enter the server ID, user ID and password (if required), and then press [OK] for each option. - For other selections, enter the user ID and Password, and then press [OK] for each option. If you have not imported a CA certificate into your machine, the machine will display the message [No Verification]. • If you selected the [EAP-TLS] option, press a or b to select the Encryption Type [TKIP+AES] or [AES]. When the machine displays a list of available Client Certificates, select the certificate you want. Press a or b to select the Verification Method [No Verification], [CA] or [CA + Server ID]. - If you selected the [CA + Server ID] option, enter the server ID and user ID, and then press [OK] for each option. - For other selections, enter the user ID, and then press [OK]. If you have not imported a CA certificate into your machine, the machine will display the message [No Verification]. 118