Brother International HS-5300 Service Manual - Page 53
Safety, Precautions
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
CHAPTER III DISASSEMBLY AND REASSEMBLY 1. SAFETY PRECAUTIONS To prevent the creation of secondary problems by mishandling, be careful to observe the following precautions during maintenance work. (1) Always turn off the power switch before replacing parts or units. When accessing the power supply PCB or any of its components be sure to unplug the power cord from the power outlet. Warning - When shipping the printer, pack it after waiting 30 minutes after turning the power Off to allow the printer to cool down. Moving the printer with ink melted will cause severe damage to the printer. - After you have just used the printer, some internal parts of the printer are extremely hot. Do not open the inside cover unnecessarily and never touch the shaded parts (Quench Platen, Platen and Print head) shown in the following illustration. me nisi Platen II lin attr ,/ Quench Platen 4eit • z, r. Wa (21114 I Print head High Temperature Inside the Printer - There are high voltages inside the printer. Before cleaning the printer, be sure to turn the power off and unplug the power cord from the power outlet. Q. p (2) Be careful not to lose screws, washers, or other parts removed. (3) Be sure to apply grease to the gears and applicable positions specified in this chapter. See 6. LUBRICATION.