Brother International Innov-is VM6200D Operation Manual - Page 63

BEFORE EMBROIDERING Using the Embroidery Foot "W+" d Push the black button on the presser holder and remove the presser foot. foot with LED Pointer B By plugging in the connector on the back of your machine, the embroidering needle drop point will 1 be indicated on the fabric, allowing you to accurately position the pattern. Getting Ready ■ Attaching the Embroidery Foot "W+" with LED Pointer CAUTION • When attaching a presser foot, always press on the screen. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Black button b Presser foot holder → Remove the presser foot from the presser foot holder. e Use the included screwdriver to loosen screw of the presser foot holder, then the remove the presser foot holder. a Press the "Needle the needle. Position" button to raise b Press . → The entire screen becomes white, and all keys and operation buttons are locked. a Screwdriver b Presser foot holder c Presser foot holder screw → Remove the presser foot holder. f Position the embroidery foot "W+" LED pointer on the presser foot bar with by aligning the notch of the presser foot to the large screw. Side view CAUTION • When attaching a presser foot, always press on the screen. You may accidentally press the "Start/Stop" button and possibly cause injury. c Raise the presser foot lever. Basic operations B-61