Brother International Innov-is VM6200D Operation Manual - Page 85

USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE Before using the sensor functions, carefully read the procedure in "Embroidery" and "Embroidery Edit" to B 2 familiarize yourself with the machine operations. Specifying the Embroidering Position With the Sensor Pen g Press . Sensor Functions By using the sensor pen, the embroidering position can be adjusted to the desired location. This function can be performed in either "Embroidery" or "Embroidery Edit" mode, but the procedure described below is performed in "Embroidery" mode. If the message "The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." appears during the operation, ensure safety, and then press . a Turn on the machine. b Press . c Select the category embroidered. for the pattern to be d In the pattern selection screen, press the key for the pattern to be embroidered. e Press . → Select the desired area and press when the following message appears (only for use of the extra large embroidery frame). f Hoop the fabric and attach frame to the machine. the embroidery → Refer to "Hooping the Fabric in the Embroidery Frame" on page E-13 and "ATTACHING THE EMBROIDERY FRAME" on page E-17. Basic operations B-83