Brother International Innov-is VM6200D Operation Manual - Page 71

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE When the feed position lever is down, the black roller belt on the dual feed is engaged. d Use feeding or of the to increase top fabric. or decrease the * Select "00" for sewing in most cases. * If the feed amount for the top fabric is too little, causing the fabric to be longer than the bottom fabric, press to increase the feed amount for the top fabric. * If the feed amount for the top fabric is too much, causing the fabric to be shorter than the bottom fabric, press top fabric. to decrease the feed amount for the B 1 Getting Ready Note • Do not operate the lever while sewing. ■ Adjusting the Amount of Fabric Feeding of the Dual Feed Foot The dual feed mechanism pulls the top fabric according to the set stitch length. With troublesome fabrics, fine tune the set length, by changing the dual feed feed adjustment in the settings screen. Note • As a default, some keys mentioned in the following procedures appear in light gray and are not available. To enable the keys for specifying the settings, attach the dual feed foot to the machine. The keys are enabled after the dual feed foot is detected. a Press . → The settings screen appears. b Press . → The Sewing settings screen appears. c Display screen. page 1 of the Sewing settings e Press to return to the original screen. Basic operations B-69