Home » Brother International Manuals » Multifunction Devices » Brother International MFC-7460DN » Manual Viewer

Brother International MFC-7460DN Network Users Manual - English - Page 34

MAC Address, Set to Default (For HL-2280DW, DCP-7070DW and MFC-7860DW), Wired Enable (For HL-2280DW - fax setup

UPC - 012502627012

View all Brother International MFC-7460DN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Control panel setup MAC Address 5 The MAC address is a unique number assigned for the machine's network interface. You can check your machine's MAC address from the control panel. Set to Default (For HL-2280DW, DCP-7070DW and MFC-7860DW) 5 The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want to reset both wired and wireless settings, see Reset the network settings to the factory default on page 36. Wired Enable (For HL-2280DW, DCP-7070DW and MFC-7860DW) If you want to use the wired network connection, set Wired Enable to On. 5 5 WLAN Enable (For HL-2280DW, DCP-7070DW and MFC-7860DW) 5 If you want to use the wireless network connection, set WLAN Enable to On. Note If both Wired Enable and WLAN Enable are On, you can change the active network interface by plugging or unplugging the network cable. E-mail / IFAX (For MFC-7460DN, MFC-7860DN and MFC-7860DW (if you download IFAX)) 5 This menu has five selections: Mail Address, Setup Server, Setup Mail RX, Setup Mail TX and Setup Relay. As this section requires you to enter a lot of text characters, you may find that it is more convenient to use Web Based Management and your favorite web browser to configure these settings. (See Web Based Management on page 46.) These settings must be configured for the IFAX feature to work. (For more details about Internet fax, see Internet fax (For MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a download) on page 52.) You can also access the character you want by repeatedly pressing the appropriate number key using the machine's control panel. (For entering text, see the Quick Setup Guide.) Mail Address 5 You can set your machine's E-mail address. Setup Server 5 SMTP Server This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your network. (Ex, "mailhost.brothermail.net" or "192.000.000.001") 29

Section	Page
NETWORK USER’S GUIDE	1
Table of Contents	3
1 Introduction	6
Network features	6
Other Network features	7
Internet fax (MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a download)	7
Security	7
Fax to Server (MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a download)	7
Secure Function Lock 2.0 (For MFC-7860DN and MFC-7860DW)	7
2 Changing your machine’s network settings	8
How to change your machine’s network settings (IP address, Subnet mask and Gateway)	8
Using the control panel	8
Using the BRAdmin Light utility	8
Installing BRAdmin Light	8
Setting the IP address, Subnet Mask and Gateway using BRAdmin Light	9
Other Management Utilities	11
Web Based Management (web browser)	11
BRAdmin Professional 3 utility (Windows®)	11
Web BRAdmin (Windows®)	12
BRPrint Auditor (Windows®)	12
3 Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)	13
Overview	13
Step by step chart for wireless network configuration	14
For Infrastructure mode	14
For Ad-hoc mode	15
Confirm your network environment	16
Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)	16
Connected to a wireless capable computer without a WLAN access point/router in the network (Ad-hoc mode)	16
Confirm your wireless network setup method	17
Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network (Recommended)	17
Configuration using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Push Button Configuration) (Infrastructure mode only)	17
Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network	18
Configuration using Push Button Configuration	18
Configuration temporarily using a USB or network cable	19
USB method	19
Ethernet cable method	19
Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)	20
Configuring your machine for a wireless network (For Infrastructure mode and Ad-hoc mode)	21
Using the Setup Wizard from the control panel	21
Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Push Button Configuration)	21
Configuring your machine when the SSID is not broadcast	22
Using the Brother installer application on the CD-ROM to configure your machine for a wireless network	25
Using the PIN Method of Wi-Fi Protected Setup	25
4 Wireless configuration using the Brother installer application (For HL-2280DW, DCP-7070DW and MFC-7860DW)	27
Before configuring the wireless settings	27
Configure the wireless settings	27
5 Control panel setup	30
Network menu	30
TCP/IP	30
Boot Method	30
IP Address	31
Subnet Mask	31
Gateway	31
Node Name	31
WINS Config	31
WINS Server	31
DNS Server	32
APIPA	32
IPv6	32
Ethernet (wired network only)	32
Status (For DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN)/Wired Status (For HL-2280DW, DCP-7070DW and MFC-7860DW)	33
Setup Wizard (wireless network only)	33
WPS or AOSS™ (wireless network only)	33
WPS w/PIN Code (wireless network only)	33
WLAN Status (wireless network only)	33
Status	33
Signal	33
SSID	33
Comm.Mode	33
MAC Address	34
Set to Default (For HL-2280DW, DCP-7070DW and MFC-7860DW)	34
Wired Enable (For HL-2280DW, DCP-7070DW and MFC-7860DW)	34
WLAN Enable (For HL-2280DW, DCP-7070DW and MFC-7860DW)	34
E-mail / IFAX (For MFC-7460DN, MFC-7860DN and MFC-7860DW (if you download IFAX))	34
Mail Address	34
Setup Server	34
Setup Mail RX	35
Setup Mail TX	36
Setup Relay	36
How to set a new default for Scan to E-mail (E-mail server) (MFC-7460DN, MFC-7860DN and MFC-7860DW (if you download IFAX))	37
Scan to FTP (For MFC-7460DN, MFC-7860DN and MFC-7860DW)	37
Fax to Server (For MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a download)	38
Setting Fax to Server to On	38
How to operate Fax to Server	39
Time Zone	40
Windows® Time Zone setting	40
Reset the network settings to the factory default	41
Printing the Network Configuration List	41
Printing the WLAN report (For HL-2280DW, DCP-7070DW and MFC-7860DW)	42
Function table and default factory settings	43
DCP-7065DN, MFC-7360N, MFC-7460DN and MFC-7860DN	43
HL-2280DW, DCP-7070DW and MFC-7860DW	45
MFC-7460DN, MFC-7860DN and MFC-7860DW (if you download IFAX )	49
6 Web Based Management	51
Overview	51
How to configure the machine settings using Web Based Management (web browser)	51
Password information	52
Secure Function Lock 2.0 (For MFC-7860DN and MFC-7860DW)	53
How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)	53
Basic configuration	53
Scanning when using Secure Function Lock 2.0	54
Restricting PC print by PC user login name	54
Setting up public mode	55
Other features	55
Changing the Scan to FTP configuration using a web browser (For MFC-7460DN, MFC-7860DN and MFC-7860DW)	56
7 Internet fax (For MFC-7460DN, MFC-7860DN and MFC-7860DW: available as a download)	57
Internet fax Overview	57
Important information on Internet fax	58
How to Internet fax	59
Sending an Internet fax	59
Before sending an Internet fax	59
How to send an Internet fax	59
Receiving E-mail or Internet fax	60
Before receiving an Internet fax	60
How to receive an Internet fax	60
Receiving an Internet fax to your computer	61
Additional Internet Fax options	62
Forwarding received E-mail and fax messages	62
Relay broadcasting	62
Before relaying broadcast	62
Relay broadcast from a machine	63
Sending to multiple phone numbers:	64
Relay broadcast from a computer	64
TX Verification Mail	65
Setup Mail TX	65
Setup Mail RX	65
Error mail	66
Scan to E-mail (E-mail server) overview	67
How to operate Scan to E-mail (E-mail server)	67
Using One Touch or Speed Dial number	68
8 Security features	69
Overview	69
Sending an E-mail securely	69
Configuration using Web Based Management (web browser)	69
Sending an E-mail with user authentication	70
Secure Management using BRAdmin Professional 3 (Windows®)	71
Using BRAdmin Professional securely	71
9 Troubleshooting	72
Overview	72
Identifying your problem	72
Go to the page for your solution from the lists below	72
Appendix A	79
Supported protocols and security features	79