Brother International MFC-9970CDW Users Manual - English - Page 56
Turning off distinctive ring, Connecting an external TAD (telephone answering device
UPC - 012502625131
View all Brother International MFC-9970CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 6 Turning off distinctive ring 6 a Press MENU. b Press a or b to display Fax. Press Fax. c Press a or b to display Miscellaneous. Press Miscellaneous. d Press Distinctive. e Press Off. f Press Stop/Exit. Note If you do not want to receive faxes on your Distinctive Ring number, you can turn off Distinctive Ring. The machine will stay in Manual receive mode so you will need to set the Receive Mode again. (See Choose the correct Receive Mode on page 32.) Connecting an external TAD (telephone answering device) 6 You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the TAD answers a call, your machine will "listen" for the CNG (fax calling) tones sent by a sending fax machine. If it hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice message and the display will show Telephone. The external TAD must answer within four rings (we recommend you set it to two rings). This is because your machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your external TAD if it needs more than four rings to activate it. Unless you are using Distinctive Ring, the TAD must be connected to the EXT. jack of the machine. Before you connect an external TAD (telephone answering device), remove the protective cap (2) from the EXT. jack on the machine. 1 1 2 1 TAD 2 Protective Cap Note If you have problems receiving faxes, reduce the ring delay setting on your external TAD. 40