Brother International MFC-J880DW Basic Users Guide - Page 29
Change the Check Paper Size Setting, Change the Paper Size and Paper Type, Change the Check Paper
![]() |
View all Brother International MFC-J880DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2 Paper Handling Change the Check Paper Size Setting If the Check Paper setting is set to [On] and you pull the paper tray out of the machine, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings. The default setting is [On]. 1 Press [Settings] > [All Settings] > [General Setup] > [Check Paper]. 2 Press [On] or [Off]. 3 Press . Related Information • Error and Maintenance Messages on page 44 Change the Paper Size and Paper Type Set the Paper Size and Paper Type settings for the paper tray. • To get the best print quality, set the machine for the type of paper you are using. • When you change the size of the paper you load in the tray, you must change the Paper Size setting on the LCD at the same time. 1 Do one of the following: • (MFC-J680DW) Press [Settings] > [Paper Type]. • (MFC-J880DW/MFC-J885DW) Press [Settings] > [Tray Setting] > [Paper Type]. 2 Press a or b to display the [Plain Paper], [Inkjet Paper], [Brother BP71] or [Other Glossy] option, and then press the option you want. 3 Press [Paper Size]. 4 Press a or b to display the paper size options, and then press the option you want. 5 Press . The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams. 13
![](/manual_guide/products/brother-international-mfcj680dw-basic-users-guide-78d4393/29.png)