Brother International NC2200W Network User Guide - Page 11

Test Button, <Bottom&gt, <Right Side&gt, <Front face&gt

Get Brother International NC2200W PDF manuals and user guides View all Brother International NC2200W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

■ Ethernet Address (MAC Address) The Ethernet Address of the device. An Ethernet Address is sometimes referred to as a MAC Address. ■ NC-2200w (USB Port) Connect a USB cable (Type A) here. B A (Up to 6 feet or 2 m) ■ Power Connector Connects to the AC adapter. Test Button How to Print a Network Configuration Page To print the Network Configuration Page, press the Test Button of the NC-2200w. How to Reset to Factory Default Setting If you wish to reset the NC-2200w back to its default factory settings (resetting all information such as the wireless settings, password and IP address), hold down the Test Button for more than 10 seconds. Do not turn the NC-2200w power switch off during factory default setting. 1 - 4 INTRODUCTION

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
1 - 4 INTRODUCTION
<Bottom>
■
Ethernet Address (MAC Address)
The Ethernet Address of the device. An Ethernet Address is
sometimes referred to as a MAC Address.
<Right Side>
■
NC-2200w (USB Port)
Connect a USB cable (Type A) here.
■
Power Connector
Connects to the AC adapter.
<Front face>
Test Button
How to Print a Network Configuration Page
To print the Network Configuration Page, press the Test Button of the
NC-2200w.
How to Reset to Factory Default Setting
If you wish to reset the NC-2200w back to its default factory settings
(resetting all information such as the wireless settings, password and
IP address), hold down the Test Button for
more than
10 seconds.
Do not turn the NC-2200w power switch off during factory
default setting.
A
B
(Up to 6 feet or 2 m)