Brother International NC2200W Network User Guide - Page 28
NC-2200W WIRELESS SETTING 2 - 17, If your network is not con d for Authentication
View all Brother International NC2200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
■ The NC-2200w supports the Automatic Private IP Addressing (APIPA) protocol. If a DHCP/BOOTP/RARP server is unavailable, the NC-2200w will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. ■ We recommend that you contact your network administrator if you are unsure about the correct IP address settings. 8 A list of the found Wireless Networks will be displayed. Select the Access Point/Base Station you wish to associate the NC2200w with and click Next. ■ If the Access Point/Base Station doesn't appear on the list, you can manually add it by clicking Add. Follow the on screen instructions for entering the SSID/ESSID and Channel number. ■ The SSID/ESSID name "SETUP" may be displayed on the list more than one time. You can select any "SETUP" from the list. 9 If your network is not configured for Authentication and Encryption, the screen shown will appear. To continue installation, click OK. Go to Step 10. NC-2200W WIRELESS SETTING 2 - 17