Brother International NC2200W Network User Guide - Page 60

Wireless Setup Problems, Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered

Get Brother International NC2200W PDF manuals and user guides View all Brother International NC2200W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Wireless Setup Problems The NC-2200w is not found while setup by the Wireless Setup Wizard Make sure that the Link LED is turned on. If the Link LED is not turned on, Brother NC-2200w may not work properly. Check the following: 1 Check if the Brother NC-2200w power is turned on. 2 Check if the Brother NC-2200w is securely connected to the Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered on. 3 Move your PC closer to the Brother Printer/MFC/DCP with the NC-220w installed and try gain 4 Reset the NC-2200w back to the default setting and try again. For the information how to reset to the factory default setting, see Test Button on page 1-4. Before you configure the NC-2200w, you need to temporarily change your computer's wireless settings to communicate with the unconfigured NC-2200w. Check following: 1 Check if the wireless settings of your computer are as follows. ■ Communication mode: Ad-hoc (channel 11) ■ Network name (SSID/ESSID): SETUP (case sensitive) ■ Encryption : None 2 If you are using Windows® XP or Mac OS® X 10.2.4-10.3 or greater, and the Ad-hoc network "SETUP" doesn't appear in the available network list of the wireless setup utility of the Windows® XP or Mac OS® X, you may be able to resolve this problem by manually adding the Ad-hoc network using the following procedure. TROUBLESHOOTING 6 - 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
TROUBLESHOOTING 6 - 2
Wireless Setup Problems
The NC-2200w is not found while setup by the Wireless Setup
Wizard
Make sure that the Link LED is turned on. If the Link LED is not
turned on, Brother NC-2200w may not work properly. Check the
following:
1
Check if the Brother NC-2200w power is turned on.
2
Check if the Brother NC-2200w is securely connected to the
Brother Printer/MFC/DCP and the Printer/MFC/DCP is powered
on.
3
Move your PC closer to the Brother Printer/MFC/DCP with the
NC-220w installed and try gain
4
Reset the NC-2200w back to the default setting and try again.
For the information how to reset to the factory default setting,
see
Test Button
on page 1-4.
Before you configure the NC-2200w, you need to temporarily change
your computer’s wireless settings to communicate with the un-
configured NC-2200w. Check following:
1
Check if the wireless settings of your computer are as follows.
■
Communication mode: Ad-hoc (channel 11)
■
Network name (SSID/ESSID): SETUP (case sensitive)
■
Encryption
: None
2
If you are using Windows
®
XP or Mac OS
®
X 10.2.4-10.3 or
greater, and the Ad-hoc network “SETUP” doesn’t appear in the
available network list of the wireless setup utility of the
Windows
®
XP or Mac OS
®
X, you may be able to resolve this
problem by manually adding the Ad-hoc network using the
following procedure.