Brother International PE 150 Users Manual - English - Page 30
START/STOP button, Embroidery frame - hoop
UPC - 012502101802
View all Brother International PE 150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE ERROR MESSAGE TROUBLESHOOTING 3. Place the fabric in the embroidery frame and then attach the frame to the machine. (See page 20 - 22) 1 Carriage (embroidery arm) 2 Embroidery frame NOTE Do not push down the carriage too hard as you attach the hoop. Use caution so as not to move the carriage sideways. * It is easier to move the embroidery frame under the presser foot if the presser foot lever is raised higher than its normal "up" position. 1 Normal presser foot lever "up" position 2 Presser foot lever pushed up 3 Presser foot lever down position 4. Turn on the power. The light will shine when the power is turned on. 5. Select a pattern. 6. Lower the presser foot lever and press the "START/STOP" button to start the machine. 1 "START/STOP" button 27 PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL)