Brother International PT-9600 Users Manual - English and Spanish - Page 29
Installing the USB printer driver
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Getting Started Ch. 2 Getting Started Installing the USB printer driver With Plug-and-Play, new devices connected to the system are detected, and their drivers are automatically installed. If the P-touch 9600/ 3600 is to be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the printer driver supplied on the CD-ROM. NOTE ☞ Do not connect the P-touch to the computer until you are instructed to do so, otherwise the printer driver may not be installed correctly. ☞ The dialog boxes shown in the procedures below are for the installation of the software for the PT-9600. When installing the software for the PT-3600, the dialog boxes may be slightly different from those shown. 3 Connect the P-touch to the computer using the enclosed USB interface cable as described on page 9, and then turn on the P-touch. A dialog box appears, indicating that the printer driver has been installed. 4 Click the Finish button. NOTE To install the USB printer driver With Windows® 98, 98 SE, Me or 2000: 1 In the dialog box that appears, allowing you to select whether the P-touch will be connected with a USB cable or an RS-232C cable, select "USB cable", and then click the OK button. A dialog box appears, informing you that the PT-9600/3600 printer driver will be installed. If a dialog box appears, indicating that the installation is finished and explaining that the computer should be restarted, select the option for restarting the computer, click the Finish button to restart the computer, and then remove the CD-ROM from the computer. With Windows® XP: 2 Click the Next button. A dialog box appears, instructing you to connect the P-touch to the computer. 1 In the dialog box that appears, allowing you to select whether the P-touch will be connected with a USB cable or an RS-232C cable, select "USB cable", and then click the OK button. A dialog box appears, informing you that the PT-9600/3600 printer driver will be installed. 17