Brother International RJ-3050Ai P-touch Template Manual/ Command Reference - Page 19
Steps, Step 1: Change the mode to P-touch Template mode.
![]() |
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
P-touch Template 2.0 Command Reference 3.2 Example for using ZPL II in P-touch Template 2.0 Here is the label that will be made. 609 dots (3 inches) 290 dots Example: A case 203dpi printer is used 150 dots 609 dots (3 inches) Font is outline font, and size is 50, 50 dots. Steps 1. Change the mode to P-touch Template mode. 2. Set the label length with ^LL. 3. Set the label width with ^PW. 4. Send other ZPL II command. Step 1: Change the mode to P-touch Template mode. P-touch Template mode can be selected by using the P-touch Template Settings tool shown below. Select P-touch Template mode. - 13 - 3. Examples for Using Commands
![](/manual_guide/products/brother-international-rj3050-ptouch-template-manual-command-reference-8256c99/19.png)
P-touch Template 2.0 Command Reference
- 13 -
3. Examples for Using Commands
3.2 Example for using ZPL
II
in P-touch Template 2.0
Here is the label that will be made.
609 dots (3 inches)
609 dots (3 inches)
150 dots
290 dots
Example:
A case 203dpi printer is used
Font is outline font, and size is
50, 50 dots.
Steps
1. Change the mode to P-touch Template mode.
2. Set the label length with ^LL.
3. Set the label width with ^PW.
4. Send other ZPL
II
command.
Step 1: Change the mode to P-touch Template mode.
P-touch Template mode can be selected by using the P-touch Template Settings tool shown below.
Select P-touch Template mode.