Brother International RJ-3050Ai P-touch Template Manual/ Command Reference - Page 45
Select printer settings cut options
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
P-touch Template 2.0 Command Reference ^CO Select printer settings (cut options) ASCII: ^ C O n1 n2 Decimal: 94 67 79 nd1 nd2 Hexadecimal: 5E 43 4F nh1 nh2 n3 n4 nd3 nd4 nh3 nh4 Parameters 0≤n1≤1 0≤n2≤9 0≤n3≤9 0≤n4≤1 Description Specifies the various cut options. n1: Auto cut setting (ON: 1 (default); OFF: 0) (n2*10)+n3: Auto cut label number setting (1 to 99) (Default value: 1) n4: Cut at end setting (ON: 1 (default); OFF: 0) This command is a dynamic command. This command is applied to only a printer with auto cutter. Remarks The auto cut label number setting can be between 1 and 99. This command becomes invalid if any other value has been specified. Example To cut after every two labels: Since the auto cut setting will be set to ON and the auto cut label number will be two labels, n1=1, n2=0 and n3=2. Therefore, the command will be as follows. ^ C O 1 0 2 0 (5Eh 43h 4Fh 31h 30h 32h 30h) - 39 - 7. Control Command Details