Brother International RJ-3050Ai P-touch Template Manual/ Command Reference - Page 65
XESC iXP2 PSpecify print start command text string
![]() |
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
P-touch Template 2.0 Command Reference ESC iXP2 Specify print start command text string ASCII: ESC i X P 2 n1 n2 data Decimal: 27 105 88 80 50 nd1 nd2 datad Hexadecimal: 1B 69 58 50 32 nh1 nh2 datah Parameters 01h≤nh1≤14h nh2: 00h (Fixed) 00h≤datah≤FFh Description Specifies the text string for the print start command. nh1+(nh2*256): Length of the text string (can be set between 1 and 20) data: Text string (The maximum number of characters that can be set is 20 characters (bytes).) The default text string for the print start command is "^FF". This command is a static command. Remarks Invalid if more than 20 characters have been specified Example To change the text string for the print start command to "START": Since the text string to be specified (data), "START", contains 5 characters, nh1=05h and nh2=00h. Therefore, the command will be as follows. ESC i X P 2 05h 00h S T A R T (1Bh 69h 58h 50h 32h 05h 00h 53h 54h 41h 52h 54h) - 59 - 7. Control Command Details
![](/manual_guide/products/brother-international-rj3050-ptouch-template-manual-command-reference-8256c99/65.png)