Brother International T-8422C Instruction Manual - English - Page 29
Winding the lower thread, After the thread has been wound on, remove the bobbin
View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4. PREPARATION BEFORE SEWING 4-3. Winding the lower thread CAUTION Do not touch any of the moving parts or press any objects against the machine while winding the lower thread, as this may result in personal injury or damage to the machine. 2897M 1. Turn on the power switch. 2. Place the bobbin (1) onto the bobbin winder shaft (2). 3. Wind the thread several times around the bobbin (1) in the direction indicated by the arrow. * Check that the thread is not loose anywhere along the thread path. 4. Push the bobbin presser arm (3) toward the bobbin (1). 5. Raise the presser foot with the lifting lever. 6. Depress the treadle. Lower thread winding will then start. 7. Once winding of the lower thread is completed, the bobbin presser arm (3) will return automatically. 8. After the thread has been wound on, remove the bobbin and cut the thread with the knife (4). More thread Less thread * Loosen the screw (5) and move the bobbin presser (6) to adjust the amount of thread wound onto the bobbin. NOTE: The amount of thread wound onto the bobbin should be a maximum of 80 % of the bobbin capacity. 2123M 2124M T-8421C, 8422C, 8452C, 8722C, 8752C 20