Brother International T-8422C Instruction Manual - English - Page 50
USING THE G10 OPERATION PANEL(ADVANCED OPERATIONS), 8-1. Changing the needle stop position
View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS) 8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS) The operations described in this section should only be carried out by a technician. 8-1. Changing the needle stop position This sets whether the needle bar stops in the needle up stop position or the needle down stop position when the treadle is returned to the neutral position and sewing stops. * This setting cannot be carried out if the lock function is on. (For details on turning the lock function off, refer to "8-7. Lock function".) 1 Activating setting mode (Setting item) (While pressing the end backtack key, press the power ON switch.) 2 Setting the needle up stop and needle down stop positions (Setting value) 3 (Setting item) 4203M ・ When the key is pressed, the "UP" display will appear. ・ When the key is pressed, the "dn" display will appear. ... Needle up stop ... Needle down stop NOTE: If the start backtack key (1) is pressed once more, the start backtack indicator will switch off and the display will return to the setting item. 4204M The setting will be stored and the display will return to the setting item. 4205M 4 Setting mode will be exited and normal operation will be possible. 4206M 41 T-8421C, 8422C, 8452C, 8722C, 8752C