Brother International T-8422C Instruction Manual - English - Page 44
Adjusting the needle up stop position, USING THE G50 OPERATION PANEL ADVANCED OPERATIONS
View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS) 6-2. Adjusting the needle up stop position 1 4189M 2138M (While pressing the key (1), press the power ON switch.) 2 Selecting "UpoS xxx" "MorG xxx" will appear in orange in the main display (2). "xxx" is the setting value for the needle up stop position, and "0" is the default setting. (Setting value) (Press once) 3 Needle up stop position setting Example: 4190M • If you press the key, the setting value will increase and the needle up stop position will become lower. • If you press the key, the setting value will decrease and the needle up stop position will become higher. • The setting range is from -5 to 10. * A setting value of "10" corresponds to an angle of rotation of approximately 10° for the upper shaft. Becomes higher Becomes lower 2188B 2138M 2139M 4 The setting values will be memorized. 4192M 5 Normal sewing machine operation will then be possible. * For details on other adjustment items, refer to the Service Manual. 4193M 35 T-8421C, 8422C, 8452C, 8722C, 8752C