Brother International T-8422C Instruction Manual - English - Page 42
Using the lower thread counter, USING THE G50 OPERATION PANEL BASIC OPERATIONS
View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS) 5-6. Using the lower thread counter y The lower thread counter can be used to let you know approximately how much lower thread is remaining. y The value displayed by the lower thread counter display is reduced by 1 from the initial setting value each time the sewing machine sews 10 stitches, and a warning is given when the counter goes below "0". 1 After about 2 seconds, the buzzer will sound and the lower thread counter display will show the initial value which was set previously. (Press for 2 seconds or more) 2 ・ When the + key is pressed, the setting increases. ・ When the - key is pressed, the setting decreases. ・ If you hold down the keys, the setting will change more quickly. ・ If a value of "0" is set, the lower thread counter will not operate. ・ The initial setting value will be accepted when sewing starts. 4182M (Initial value) Reduces by 1 for every 10 stitches sewn (Buzzer sounds for 5 seconds) Sewing is possible until thread trimming is carried out (models with thread trimmer). 4183M Press the RESET key (2) for 2 seconds or more. 4184M 1. When sewing is carried out, the value shown in the lower thread counter display is reduced by 1 for every 10 stitches sewn. (When the value goes below zero ("0"), a minus sign appears and counting continues to a maximum of "-999".) 2. When the value goes below "0", a warning icon (1) illuminates and an electronic buzzer sounds for 5 seconds. 3. Sewing will be possible even after the treadle is returned to the neutral position and the sewing machine stops. However, after the treadle has been depressed backward and thread trimming has been carried out (models with thread trimmer), sewing using the treadle will no longer be possible. NOTE: If the treadle is depressed after sewing is no longer possible, the buzzer will sound once and " rESEt" will appear in green in the main display. When the treadle is returned to the neutral position, the display will return to the original display. If you press the RESET key (2), the warning icon (1) will disappear and sewing will be possible when the treadle is depressed. 4. If you press and hold the RESET key (2) for 2 seconds or more, the display will return to the initial value. 33 T-8421C, 8422C, 8452C, 8722C, 8752C