Brother International T-8422C Instruction Manual - English - Page 83

Feed dog angle, the feed dog in accordance with the needle for lower feed

Get Brother International T-8422C PDF manuals and user guides View all Brother International T-8422C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

13-11. Feed dog angle Front raised Standard Front lowered 13. STANDARD ADJUSTMENT The standard angle for the feed dog is when the mark (2) on the feed bar shaft (1) is aligned with the reference line (4) on the feed rocker base arm (3). 1. Tilt back the machine head. 2. Loosen the set screw (5). 3. Insert a screwdriver into the slit (6) in the feed bar shaft (1), and turn it to make the adjustment. 4. Tighten the set screw (5). * When the angle of the feed dog is adjusted, the forward-back position of the feed dog will change. Loosen the two screws (7) and adjust the forward-back position of the feed dog in accordance with the needle (for lower feed, in accordance with the needle plate). * In addition, when the angle of the feed dog is adjusted, the height of the feed dog will also change, so readjust the height of the feed dog. 3067M T-8421C, 8422C, 8452C, 8722C, 8752C 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
13. STANDARD ADJUSTMENT
74
13-11. Feed dog angle
The standard angle for the feed dog is when the mark (2) on
the feed bar shaft (1) is aligned with the reference line (4) on
the feed rocker base arm (3).
1. Tilt back the machine head.
2. Loosen the set screw (5).
3. Insert a screwdriver into the slit (6) in the feed bar shaft
(1), and turn it to make the adjustment.
4. Tighten the set screw (5).
* When the angle of the feed dog is adjusted, the
forward-back position of the feed dog will change. Loosen
the two screws (7) and adjust the forward-back position of
the feed dog in accordance with the needle (for lower feed,
in accordance with the needle plate).
* In addition, when the angle of the feed dog is adjusted,
the height of the feed dog will also change, so readjust the
height of the feed dog.
3067M
Front raised
Standard
Front lowered