Brother International TD-2135N Users Guide TD-2020A/2125NWB/2135NWB - Page 70
Using the RJ25 to DB9M Serial Adapter (Optional: PA-SCA-001)
View all Brother International TD-2135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
9 Using the RJ25 to DB9M Serial Adapter (Optional: PA-SCA-001) 9 Connecting the Computer and Printer With the RJ25 to DB9M Serial Adapter 9 Be sure to use the cable designed for your Brother optional product. a Before connecting the serial cable, make sure that the printer and the computer are turned off. b Connect the RJ25 side of the adapter to the printer. c Connect the printer end of the serial cable to the DB9M side of this adapter. d Connect the other end of the serial cable to the serial port on the computer. NOTE • The default communication settings are as follows: Baud rate: 9600bps Parity: None Bit length: 8 bits Flow control: Hardware • To change the communication settings, use [P-touch Template settings] in the "Printer Setting Tool" - [Communication settings]. For more information, see the P-touch Template Command Reference. The latest versions can be downloaded from the support website. support.brother.com Select the product, and then select [Manuals]. Product Specifications 9 Converts to a D-sub 9-pin male connector. 1 1 RJ25 to DB9M Serial Adapter 64