Brother International TD-2135N Users Guide TD-2020A/2125NWB/2135NWB - Page 78
Setting the Administrator Password
![]() |
View all Brother International TD-2135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Chapter 10 f Press [OK]. The main screen appears, and the specified time and date are displayed. NOTE The format for the time and date can be changed. Press [ ] (admin key), select [Setup], then [Time&Date Form] from the parameters, and then specify settings for [Date Format] and [Time Format]. Setting the Administrator Password 10 A password can be set so that basic settings specified by pressing [ ] (admin key) cannot easily be accessed. If a password is set, each time [ ] (admin key) is pressed, a password must be entered. Access to these parameters can be restricted by setting a password. a Press [ ] (admin key). b Press [b], select [Admin Password], and then press [OK]. c Press [b], select [On], and then press [OK]. The password input screen appears. d Type in the 4-digit password, and then press [OK]. The password is set. NOTE • This parameter can be accessed only when touchpanel A (basic control panel) is set. • After a password has been set, the password input screen appears when [ ] (admin key) is pressed. Type in the specified 4-digit password, and then press [OK]. • To cancel the password settings, press [ ] (admin key), type in the password to display the parameters, and then set [Admin Password] to [Off]. • If you do not remember the password, use [Device settings] in the "Printer Setting Tool" to return all settings to their factory defaults or specify the password again and apply it. For more information, see Device Settings on page 28. 72
![](/manual_guide/products/brother-international-td2125n-users-guide-td2020a2125nwb2135nwb-3560220/78.png)