Brother International WL-660 Users Manual - English - Page 46
Be sure all protective parts are removed. Failure to remove every one
View all Brother International WL-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English USER'S GUIDE 5. Unpack the new drum unit and gently shake it from side to side five or six times. Fig. 5-12 Unpacking the Drum Unit 6. Remove the protective parts x - } in order as shown below. Fig. 5-13 Removing the Protective Parts Caution • Unpack a drum unit immediately before installing it into the printer. Exposing an unpacked drum unit to direct sunlight or room light may damage the unit. • Be sure all protective parts are removed. Failure to remove every one can result in unacceptable print quality or may damage your printer. • Handle the toner cartridge and the drum unit carefully as it may contain loose toner. If toner scatters and your hands or clothes get dirty, wipe or wash it off with cold water immediately. 5-8
USER’S GUIDE
5–8
English
5.
Unpack the new drum unit and gently shake it from side to side five
or six times.
Fig. 5-12 Unpacking the Drum Unit
6.
Remove the protective parts
-
in order as shown below.
Fig. 5-13 Removing the Protective Parts
Caution
•
Unpack a drum unit immediately before installing it into the printer.
Exposing an unpacked drum unit to direct sunlight or room light may
damage the unit.
•
Be sure all protective parts are removed. Failure to remove every one
can result in unacceptable print quality or may damage your printer.
•
Handle the toner cartridge and the drum unit carefully as it may
contain loose toner. If toner scatters and your hands or clothes get
dirty, wipe or wash it off with cold water immediately.