Brother International WL-660 Users Manual - English - Page 52
See the REPLACING THE DRUM UNIT
View all Brother International WL-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English USER'S GUIDE 9. Clean the primary corona wire inside the drum unit by gently sliding the tab right and left several times. Home Position (v) Bottom view of drum unit Fig. 5-19 Cleaning the Primary Corona Wire 10. When cleaning is completed, position the tab at the left end of the drum unit (v mark position.) Caution Be sure to position the tab at the home position or to the left end of the drum after cleaning. 11. Re-install the drum unit into the printer. See the section "REPLACING THE DRUM UNIT" in Chapter 5. 12. Close the drum cover and top cover. Caution Be sure to close the drum cover securely by pressing down firmly on both sides next to the blue tabs. 13. Install the multi-purpose sheet feeder. See the section "MULTI-PURPOSE SHEET FEEDER" in Chapter 2. 14. Plug in the power cord. 5-14