Brother International XL-2230 Users Manual - English - Page 12
Main Power and Sewing, Light Switch, Foot Controller, Checking the Needle - part
View all Brother International XL-2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Main Power and Sewing Light Switch This switch turns the mains power and sewing light on or off. 1 Turn on (toward the 'I' mark) 2 Turn off (toward the 'O' mark) Checking the Needle The sewing needle must always be straight and sharp for smooth sewing. 1 ■ To Check the Needle Correctly: 1 Put the flat side of the needle on a flat surface. 2 Check the needle from the top and the sides. Dispose of any bent needles safely. Foot Controller When you press the foot controller down lightly, the machine will run at a low speed. When you press harder, the machine's speed will increase. When you take your foot off the foot controller, the machine will stop. You should make sure that nothing is placed on the foot controller when the machine is not in use. 1 2 1 Parallel space 2 Level surface (bobbin cover, glass, etc.) 1 1 Foot controller CAUTION ● Do not allow pieces of cloth and dust to build up on the foot controller. Doing so could cause a fire or an electric shock. Note (For U.S.A. only) ● Foot Controller: Model N This foot controller can be used for Model XL-2121, XL-2125, XL-2230. . 11