Brother International XL-2230 Users Manual - English - Page 24

Important - presser foot

Get Brother International XL-2230 PDF manuals and user guides View all Brother International XL-2230 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Upper Threading 5 1 2 1 3 4 1 Spool pin 2 Thread guide (back) 3 Thread guide (front) 4 Thread take-up lever 5 Mark on the balance wheel CAUTION ● Make sure you thread the machine properly. If you don't, the thread could tangle and break the needle. IMPORTANT: Raise the presser foot using the presser Foot 1 Lever. 1 1 Presser foot lever Raise the needle to its highest position by 2 turning the balance wheel toward you (counterclockwise) so that the mark on the balance wheel points directly up. If the needle is not correctly raised, the sewing machine can not be threaded. Be sure to turn the balance wheel so that the mark on the wheel points up before threading the sewing machine. Pull up the spool pin and put a spool of thread 3 on this pin. CAUTION ● If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break. Feed the upper thread as shown in the 4 diagram above. Pass the thread through both thread guides: the back one first, and then the front one. Make sure you guide the thread through the 5 thread take-up lever from right to left. 1 1 1 Thread take-up lever 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
23
1
Upper Threading
1
Spool pin
2
Thread guide (back)
3
Thread guide (front)
4
Thread take-up lever
5
Mark on the balance wheel
IMPORTANT:
1
Raise the presser foot using the presser Foot
Lever.
1
Presser foot lever
2
Raise the needle to its highest position by
turning the balance wheel toward you
(counterclockwise) so that the mark on the
balance wheel points directly up.
If the needle is not correctly raised, the
sewing machine can not be threaded. Be sure
to turn the balance wheel so that the mark on
the wheel points up before threading the
sewing machine.
3
Pull up the spool pin and put a spool of thread
on this pin.
4
Feed the upper thread as shown in the
diagram above. Pass the thread through both
thread guides: the back one first, and then the
front one.
5
Make sure you guide the thread through the
thread take-up lever from right to left.
1
Thread take-up lever
5
2
1
3
4
●
Make sure you thread the machine
properly. If you don’t, the thread could
tangle and break the needle.
CAUTION
1
●
If the spool of thread is in the wrong
place, or is set incorrectly, the thread
may tangle on the spool pin and cause
the needle to break.
CAUTION
1
1