Brother International XL-2230 Users Manual - English - Page 26
for the appropriate needle and thread
View all Brother International XL-2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Pull down the needle threader lever as much 4 as possible, and then turn the lever toward the Raise the needle threader lever and pull out 6 about 5 cm (2 inch) of thread through the back of the machine (away from you). Make needle toward the back of the sewing sure that the hook passes through the eye of machine. the needle and grabs the thread. 1 • Hold the thread in front of the needle to make sure that the hook grabs it. While lightly holding the thread, turn the 5 needle threader lever toward the front of the machine (toward you). The hook will pull the thread through the needle. CAUTION ● The needle threader can only be used 1 2 1 with home sewing machine needles size 75/11-100/16. Check the table on page 1 Hook 2 Thread 47 for the appropriate needle and thread combinations. If you are using transparent nylon mono-filament thread, you can only use needles in the range of 90/14-100/16. ● You can not use the needle threader if you are using decorative threads or speciality needles, such as the twin needle and wing needle. If you are using those types of threads or needles, thread the eye of the needle by hand. Make sure the main power switch is off when threading the needle by hand. 25