Brother International XL-2230 Users Manual - English - Page 9

KNOWING YOUR SEWING MACHINE THE MAIN PARTS 2 4 31 0 E 5 A 67 89 B D C 1 Bobbin winder (Page 18) This winds the thread onto the bobbin,which you use for the lower thread. 2 Spool pin (Page 18, 23) 3 Hole for vertical spool pin (Page 27) This holds a second spool of thread, if you want to sew with two needles. 4 Upper tension-control dial (Page 28) This controls the tension of the upper thread. 5 Needle threader (Page 24) This is only available on certain models. 6 Flat bed attachment with accessory compartment (Page 14, 17) 7 Zigzag presser foot (Page 8, 13) 8 Pattern selection dial (Page 15) You can turn this in either direction to choose the stitch you want. 9 Reverse-sewing lever (Page 17) You can push this to stitch in the reverse direction. 0 Buttonhole fine-adjustment screw (Page 34, 41) A Balance wheel B Main power and sewing light switch (Page 11) You can turn the main power and sewing light switch on and off. C Foot controller jack (Page 10) Plug in the foot controller plug and connect the machine to the power supply. D Presser foot lever (Page 23) E Foot controller (Page 11) You can use this to control the sewing speed, and to start and stop sewing. Parts Code for Zigzag Presser Foot: XC4901-051 Foot Controller: Model N Parts Code: XC5458-021 (110/120V Area) XC5454-021 (220/240V Area) XC5462-021 (U.K.) XC5493-021 (Australia, New Zealand) XC5494-021 (Argentina) XC5495-021 (110/220V Dual Area) 8