Brother International XL-2600 Owner's Manual (Español) - Spanish - Page 38
Sewing Buttons - buttonhole
View all Brother International XL-2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SEWING BUTTONHOLES AND BUTTONS Sewing Buttons At a slow speed, sew about 10 stitches. 7 Stitch Stitch Stitch Name Pattern Length Width Foot Other [mm (inch)] [mm (inch)] Zigzag Stitch F (1/64) Any Button Sewing Foot Darning Plate Measure the distance between the 1 buttonholes and set the pattern selection dial to the Zigzag Stitch, and set the width you want. Remove the power supply plug from the 2 outlet. Change the foot to the button sewing foot. 3 Place the darning plate on the needle plate. 4 Remove the material from the machine. Cut 8 the upper and lower threads and tie both threads at the back of the material. CAUTION ● Make sure the needle does not hit the button during sewing. The needle may break and you may be injured. Connect the power supply plug into the wall 5 outlet. Put a button between the foot and the fabric 6 and make sure that the needle enters the holes without hitting the button. If it hits, see step 1. 36