Brother International XL-2600 Owner's Manual (Español) - Spanish - Page 46

Appendix

Get Brother International XL-2600 PDF manuals and user guides View all Brother International XL-2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

APPENDIX 6 APPENDIX MAINTENANCE Changing the Light Bulb CAUTION ● Turn off the main power switch and unplug the machine before you change the light bulb. If the main power switch is on when you change the light bulb, you may get an electric shock. If the machine is on and you step on the foot controller, you may be injured. ● To avoid burns, let the light bulb cool down before you change it. Remove the power supply plug from the 1 outlet. Loosen the screw on the back of the sewing 2 head. Then remove the light cover from the machine. Put the light cover back on and fasten the screw. 4 Cleaning CAUTION ● Make sure you unplug the machine before you clean it, otherwise you risk getting an electric shock or being injured. Switch the machine off and unplug it. 1 Raise the needle and the presser foot. 2 Loosen the presser foot screw and the needle 3 clamp screw to remove the presser foot holder and the needle. Replace the sewing light bulb. 3 1 2 3 1 Bulb 2 Loosen 3 Tighten 44 Grasp both sides of the needle plate cover, 4 and then slide it toward you to remove the needle plate cover. 1 1 Needle plate cover

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
APPENDIX
—————————————————————————————————————————————————————
44
APPENDIX
MAINTENANCE
Changing the Light Bulb
1
Remove the power supply plug from the
outlet.
2
Loosen the screw on the back of the sewing
head. Then remove the light cover from the
machine.
3
Replace the sewing light bulb.
1
Bulb
2
Loosen
3
Tighten
4
Put the light cover back on and fasten the screw.
Cleaning
1
Switch the machine off and unplug it.
2
Raise the needle and the presser foot.
3
Loosen the presser foot screw and the needle
clamp screw to remove the presser foot
holder and the needle.
4
Grasp both sides of the needle plate cover,
and then slide it toward you to remove the
needle plate cover.
1
Needle plate cover
●
Turn off the main power switch and
unplug the machine before you change
the light bulb. If the main power switch is
on when you change the light bulb, you
may get an electric shock. If the machine
is on and you step on the foot controller,
you may be injured.
●
To avoid burns, let the light bulb cool
down before you change it.
CAUTION
1
2
3
●
Make sure you unplug the machine
before you clean it, otherwise you risk
getting an electric shock or being injured.
CAUTION
1
6