Brother International XL-2600 Owner's Manual (Español) - Spanish - Page 43
Optional Accessories - walking foot
View all Brother International XL-2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
OPTIONAL ACCESSORIES Using the Walking Foot Stitch Stitch Stitch Name Pattern Length Width [mm (inch)] [mm (inch)] Straight Stitch 1-4 2-3 (1/16-3/16) (1/16-1/8) Zigzag Stitch 1-4 0-5 (1/16-3/16) (0-3/16) This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing. The walking foot prevents these materials from crumpling, slipping or sticking between the presser foot and the material. Attach the forked section of the connecting 4 lever to the needle clamp, and fit the walking foot to the presser bar. 1 2 3 Note ● Only use the walking foot with straight or zigzag stitches. Do not use other patterns. Reverse stitches can not be sewn with the walking foot. Remove the power supply plug from the 1 outlet. Raise the needle and the presser foot. 2 Loosen the presser foot screw to remove the 3 presser foot holder. 1 Forked part of operation lever 2 Presser bar holder 5 3 Needle clamp Lower the presser foot lever and then tighten 5 the presser foot screw. 2 13 1 Screwdriver 2 Presser foot holder 3 Presser foot screw 1 1 Presser foot screw 41