Bushnell Natureview 8x40 Instruction Manual - Page 22
Field Scan, Video Sound, Default Set
View all Bushnell Natureview 8x40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Parameter Field Scan Video Sound (only affects video clips) Default Set Settings Description (Bold=default) On, Off (After On is selected): "A" Start/Stop, "B" Start/Stop, Interval Turns Field Scan (Time Lapse) recording mode on/off. When activated, Field Scan forces the camera to take photos or videos even when it is not triggered by a nearby live animal, useful for constant monitoring of an area that might be far away from the camera. The user can set the start and stop times for up to two independent "blocks" of Field Scan recording, as well as the interval time between each photo/video. To ensure correct operation, avoid setting overlapping start/stop times for Field Scan A and B. Please read the "Field Scan 2x..." section of this manual for details on using this feature. On, Off Select "On" to record audio along with the video when the camera is set to video mode (saved file sizes will be slightly larger). Cancel, Execute Select "Execute" and press OK to restore all parameters to the original factory default settings. If the camera is behaving oddly and you think you may have changed the setting for something accidently (but aren't sure which one), this will reset all parameters to their most commonly used or "generic" settings. 22