Campbell Scientific CR3000 CR3000 Micrologger - Page 456

Section 11. Glossary execution time Time required to execute an instruction or group of instructions. If the execution time of a program exceeds the Scan() Interval, the program is executed less frequently than programmed. expression A series of words, operators, or numbers that produce a value or result. Glossary. File Control File Control is a feature of LoggerNet, PC400 and RTDAQ (p. 76) datalogger support software. It provides a view of the CR3000 file system and a menu of file management commands: Delete facilitates deletion of a specified file Send facilitates transfer of a file (typically a CRBasic program file) from PC memory to CR3000 memory. Retrieve facilitates collection of files viewed in File Control. If collecting a data file from a CF card with Retrieve, first stop the CR3000 program or data corruption may result. Format formats the selected CR3000 memory device. All files, including data, on the device will be erased. LNCMD software A feature of LoggerNet Setup Screen. In the Setup Screen network map (Entire Network), click on a CR3000 datalogger node. The File Retieval tab should be one of several tabs presented at the right of the screen. Fill and Stop Memory A memory configuration for data tables forcing a data table to stop accepting data when full. final storage The portion of CR3000 SRAM Memory allocated for storing data tables with output arrays. Final Storage is a ring memory, with new data overwriting the oldest data. FLOAT Four‐byte floating‐point data type. Default CR3000 data type for Public or Dim variables. Same format as IEEE4. IEEE4 is the name used when declaring data type for stored data table data. 456