Campbell Scientific CR3000 CR3000 Micrologger - Page 535

Appendix B. Status Table and Settings Table 124. Status-Table Fields and Descriptions Fieldname Description Variable Type MeasureTime Time (μs) required to make the measurements in this scan, including integration and settling times. Processing occurs concurrent with this time so the sum of measure time and process time is not the time required in the scan instruction. This is a static value calculated at compile time. Assumes all measurement instructions will run each scan. Integer ProcessTime Processing time (μs) of the last scan. Time is measured from the end of the EndScan instruction (after the measurement event is set) to the beginning of the EndScan (before the wait for the measurement event begins) for the subsequent scan. Calculated dynamically (on the fly). Integer MaxProcTime Maximum time (μs) required to run through processing for the current scan. This value is reset when the scan exits. Calculated dynamically (on the fly). Integer BuffDepth Shows the current Pipeline Mode processing buffer depth., which indicates how far processing is currently behind measurement. MaxBuffDepth Gives the maximum number of buffers processing lagged measurement. LastSystemScan8 The last time the background calibration executed. Integer array LastSlowScan9 The last time SlowSequence scan(s) executed. Integer array SystemProcTime8,12 The time (μs) required to process the background calibration. Integer array SlowProcTime9,12 The time (μs) required to process SlowSequence scan(s). Integer array MaxSystemProcTime8, The maximum time (μs) 13 required to process the background calibration. Integer array Default Range Edit? Info Type Status Status Yes Reset by changing to 0 Status Status Status Status Status Status 535