Campbell Scientific CR3000 CR3000 Micrologger - Page 492

Appendix A. CRBasic Programming Instructions A.5.9.1 Wireless Sensor Network ArrayIndex Returns the index of a named element in an array. Syntax ArrayIndex(Name) CWB100 Sets up the CR3000 to request and accept measurements from the CWB100 wireless sensor base. Syntax CWB100(ComPort, CWSDest, CWSConfig) CWB100Diagnostics Sets up the CR3000 to request and accept measurements from the CWB100 wireless sensor base. Syntax CWB100(ComPort, CWSDest, CWSConfig) CWB100Routes Returns diagnostic information from a wireless network. Syntax CWB100Diagnostics(CWBPort, CWSDiag) CWB100RSSI Polls wireless sensors in a wireless‐sensor network for radio signal strength. Syntax CWB100RSSI(CWBPort) A.5.10 Peripheral Device Support Multiple SDM instructions can be used within a program. AM25T Controls the AM25T Multiplexer. Syntax AM25T(Dest, Reps, Range, AM25TChan, DiffChan, TCType, Tref, ClkPort, ResPort, VxChan, RevDiff, SettlingTime, Integ, Mult, Offset) AVW200 Enables CR3000 to get measurements from an AVW200 Vibrating Wire Spectrum Analyzer. Syntax AVW200(Result, ComPort, NeighborAddr, PakBusAddr, Dest, AVWChan, MuxChan, Reps, BeginFreq, EndFreq, ExVolt, Therm50_60Hz, Multiplier, Offset) 492