Canon 1236B001 EOS Utility Instruction Manual Windows - Page 27

Specifying the Parameters You can upload sharpness and contrast settings as well as a tone curve file saved with RAW Image Task and register up to 3 of these in the camera as processing parameters. O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds and EOS-1D. O For how to save a tone curve file with RAW Image Task, refer to "Processing RAW Images" in the ZoomBrowser EX Instruction Manual. O For more information on setting the processing parameters on the camera, refer to "Setting the Processing Parameters" in the camera's Instruction Manual. 1 Click [Parameters]. ¿ The [Parameters settings] dialog box appears. 2 Select a tab to be set. 3 Specify desired settings. [Standard]: The standard tone curve is set. [User Defined TCD1] to [User Defined TCD3]: You can apply the tone curve file saved in RAW Image Task. With the EOS-1Ds and EOS-1D, [User Defined] is displayed and you can select one tone curve file. Click the [Add] button and in the dialog box that appears, select the tone curve file saved on your computer. Applies the settings to the camera. Closes the dialog box. Drag the slider left or right to specify the sharpness and contrast. With the EOS-1Ds and EOS-1D, [Sharpness] and [JPEG Quality] are displayed. Select the item to be set from the list box. 4 Click the [Apply to Camera] button. ¿ The [Confirm settings] dialog box appears. 5 Confirm the settings and click the [OK] button. ¿ The processing parameter is registered on the camera. 6 Click the [Close] button. ¿ The [Parameters settings] dialog box closes, and the display returns to the shot settings window. Cover/Table of Contents Introduction 1 Downloading Images from the Camera 2 Setting the Cameras other than the EOS-1D Series Cameras 3 Setting the EOS-1D Series Cameras 4 Remote Shooting Troubleshooting Index 3-7