Canon 1236B001 EOS Utility Instruction Manual Windows - Page 31

P.Fn-07 Repeats bracketing during continuous shooting O While you hold down the shutter button, bracketing repeats continuously in the currently selected drive mode. O This function is useful when you want to continuously repeat the bracketing sequence. P.Fn-08 Sets the number of shots to be bracketed O Select the number of shots from the list box. O The usual 3-shot bracketing is changed to 2-, 3-, 5-, or 7-shot bracketing. O In bracketing shots, if you select 5-shot bracketing with 1-stop increment, the bracketing for the shots is -2, -1, 0, +1 and +2. O This function is useful for adjusting the range of bracketing. O Even when the setting is outside the bracketing level display range, the exposure is compensated as specified. O This function can be used in combination with C.Fn-09-2/3 and P.Fn-09. P.Fn-09 Changes the bracketing sequence for C.Fn-09-2/3 to increased exposure, standard exposure, and decreased exposure O The bracketing sequence when C.Fn-09-2/3 is selected (decreased exposure J standard exposure J increased exposure) changes to increased exposure J standard exposure J decreased exposure. O This function is useful when you want to start the bracketing sequence with a increased exposure. This function can be used in combination with P.Fn-08. P.Fn-10 Retains the shift amount for program shift O Normally, any program shift amount is canceled after you take the picture. This Personal Function retains the program shift amount. O This function is useful when you want to shift the standard program line so that priority is given to the shutter speed or to the aperture. By shifting the program, you can change the shutter speed or aperture and still retain the same exposure level. Under the same brightness, you can shift the program line toward the right to set a faster shutter speed and a larger aperture (lower f/number). Or you can shift the program line toward the left to set a slower shutter speed and a smaller aperture (higher f/number). P.Fn-10 retains the amount of program shift. Select the appropriate amount of shift for the level of priority you want to give to the shutter speed or aperture setting. Darker  Brightness (EV at ISO100)  Brighter 5 6 78 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Aperture 32 4 22 3 16 2 11 1 8 0 5.6 -1 4 -2 2.8 -3 2 -4 1.4 -5 30 15 8 1.0 4 2 1 2 4 8 15 30 60 125 250 500 1000 2000 4000 8000  Shutter Speed Standard program line Program line shifted toward a faster shutter speed. Program line shifted toward a slower shutter speed. With EF50mm f/1.4 USM O The program shift amount remains in effect until you set it back to the standard program manually or replace the battery or press the button. O The shift amount is retained even after you change the lens. Cover/Table of Contents Introduction 1 Downloading Images from the Camera 2 Setting the Cameras other than the EOS-1D Series Cameras 3 Setting the EOS-1D Series Cameras 4 Remote Shooting Troubleshooting Index P.Fn-13 Executes AI Servo AF continuous shooting giving priority to the drive speed O This function is compatible with the EOS-1D only. O During continuous shooting, shutter release-priority takes effect instead of focus-priority. O Effective when it is more important to capture an image even though it might be slightly out of focus. 3-11